Our products · Combustion
Combustion

Oxygen Measuring Probe – OXITEC

In-situ oxygen probe to regulate combustion and reduce energy costs

How can variations in oxygen in aggressive flue gases, laden with dust or corrosive gases, be detected quickly in order to regulate combustion in real time?

The OXITEC range uses zirconium oxide sensors positioned directly in the gas stream to quickly detect any variation in the O₂ content of the flue gas, making it possible to regulate combustion and reduce energy costs, including in explosive atmospheres (ATEX version available).

In-situ measurement

Sensor directly in the gas stream, maximum responsiveness

Resistant to aggressive conditions

Dust, corrosive gases

Service life ~10 years

Proven robustness and reliability

ATEX version

Use in explosive atmospheres

Average service life

~10 years

Any undetected variation in the oxygen content of the flue gas results in less efficient combustion and higher energy costs. The probes in the OXITEC range use zirconium oxide sensors positioned directly in the gas stream, which improves measurement responsiveness: O₂ fluctuations are detected quickly, which makes it possible to regulate combustion conditions without delay. Designed for aggressive conditions (high dust concentrations, corrosive gases), these sensors have an average service life of around 10 years.

  • Measures directly in the gas stream

    The zirconium oxide sensor is positioned in situ for better measurement responsiveness.

  • Robust in aggressive conditions

    Designed to withstand high dust concentrations and corrosive gases.

  • Average service life of 10 years

    Robustness, accuracy and versatility for most O₂ measurements, including in aggressive processes.

  • ATEX version available

    For use in explosive atmospheres.

  • MLT sensors

    Designed for aggressive conditions: high dust concentrations, corrosive gases.

Category
Combustion
Reference
OXITEC 5000
Country of manufacture
Made in France

Applications

Industrial combustion control

Industrial combustion control

Flue gases laden with dust or corrosive gases

Flue gases laden with dust or corrosive gases

Installations in explosive atmospheres (ATEX)

Installations in explosive atmospheres (ATEX)

FAQ

How can combustion be regulated quickly in response to variations in oxygen?+

OXITEC probes use a zirconium oxide sensor positioned directly in the gas stream, which makes it possible to quickly detect any fluctuation in O₂ content and regulate combustion without delay.

Does the probe withstand flue gases laden with dust or corrosive gases?+

Yes, the sensors in the range are designed for use in aggressive conditions: high dust concentrations, corrosive gases.

What is the service life of an OXITEC probe?+

About 10 years on average.

Is there a version for explosive atmospheres?+

Yes, an ATEX version is available.

What does the OXITEC 5000 system consist of?+

A probe installed directly on the process and an electronic unit that controls the probe and retrieves the measurement.

Got a project? Our experts are ready to help.

Personalised advice, a fast quote and technical support to choose the solution that fits your needs.