Certification test bench with automatic analyser and reference gas cylinders

Quality assurance & certification

EN 15267: Certification of Automated Measuring Systems (AMS/CEMS)

The certification framework that attests that an analyser model is fit to continuously monitor the emissions of a stationary source

EN 15267 is the European certification framework for automated measuring systems (AMS), better known by the acronym CEMS (Continuous Emission Monitoring Systems). Its Part 3 sets out the performance criteria and test procedures that an analyser model must satisfy, in the laboratory and then at a pilot site, before it can be sold as a compliant CEMS for the regulatory monitoring of stationary source emissions. This type certification (known as QAL1), issued by an accredited body such as TÜV or MCERTS, is a prerequisite: the EN 14181 standard then governs the measurement quality of the instrument once it is installed at a given site.

Key figures

  • EN 15267-1/2/3Standard
  • QAL1 (EN 14181)QA level
  • TÜV, MCERTS...Bodies
EN 15267 carries the general title "Air quality: Certification of automated measuring systems" and is divided into several complementary parts. Part 1 sets the general requirements applicable to AMS (definitions, common principles). Part 2 covers the initial assessment of the manufacturer's quality management system and the post-certification surveillance of its manufacturing process, the aim being to ensure that each unit produced in series remains compliant with the certified model. Part 3, the most frequently cited in the field, defines the performance criteria and test procedures specific to AMS for monitoring stationary source emissions: it is the one actually invoked when an operator or inspection body speaks of an "EN 15267 certified" analyser.

Multi-part standard

Part 1: general requirements for AMS. Part 2: assessment of the manufacturer's quality system and surveillance of series production. Part 3: performance criteria and tests for AMS measuring stationary source emissions.

Certification of a model, not of an installed unit

The EN 15267-3 test applies to a precise commercial reference of analyser, evaluated in the laboratory and then at at least one pilot site by an ISO/IEC 17025 accredited body (TÜV, MCERTS...).

Equivalent to QAL1 within the EN 14181 framework

EN 15267-3 certification constitutes the QAL1 (Quality Assurance Level 1) level of the quality assurance framework described by EN 14181, a prerequisite for the site-specific QAL2, QAL3 and AST steps.

Publicly verifiable before purchase

Certified models are listed in public registers (TÜV QAL1 register, MCERTS product list) that the buyer can consult before selecting a CEMS for a given regulatory obligation.

On the ground

Points to watch

Check the certification BEFORE purchase, not after installation

The EN 15267-3 certificate must explicitly cover the pollutant, the measuring range and the measurement technology targeted by the project; a model certified for one concentration range or application context is not automatically certified for another.

Do not confuse type certification and on-site compliance

An EN 15267-3 certified AMS remains a generic model validated in the laboratory and at a pilot site: it must then obtain its site-specific functional calibration (QAL2 under EN 14181) before any regulatory use, a separate step that type certification does not replace.

Consult the certification register, not just the commercial documentation

A datasheet may state "EN 15267 compliant" without a valid certificate; the public registers (TÜV QAL1, MCERTS) make it possible to check the actual status, the exact scope and the validity date of a model's certification.

Anticipate renewal and changes to the standard

The performance criteria of EN 15267-3 have been tightened over successive revisions (permissible measurement uncertainties narrowed); a certificate obtained under an earlier version of the standard may require retesting to remain recognised by some authorities.

Distinguish CEMS from manual reference measurement instruments

Only AMS installed for continuous, automatic measurement fall under EN 15267-3. Isokinetic or periodic manual sampling methods remain outside its scope: they come into play upstream (validation) and in parallel (QAL2, AST) as the reference methods against which a certified CEMS is compared, without themselves being subject to this type certification.

What we offer

Instruments compliant with this standard

CDL-Tecora product families most used to comply with this standard — click through to see every instrument in the family.

Go further

Related standards

Frequently asked

FAQ

Questions about this standard? Here are the most common answers.

Another question?
What is an AMS or CEMS within the meaning of EN 15267?

AMS (Automated Measuring System) is the European standards term, CEMS (Continuous Emission Monitoring System) its everyday equivalent: a measuring system permanently installed on an emission duct, which continuously analyses one or more pollutants without repeated manual intervention, as opposed to a one-off sampling campaign.

Can a manufacturer sell an analyser that is not EN 15267-3 certified as a CEMS?

Nothing technically prevents the marketing of a non-certified analyser, but an operator subject to a regulatory continuous measurement obligation must in principle install a model whose EN 15267-3 certification covers the intended pollutant and application, on pain of non-compliance with its supervisory authority. In practice, certification is therefore a decisive purchasing criterion for this use.

What is the difference between EN 15267 and EN 14181?

EN 15267-3 certifies a MODEL of AMS upstream, once and for all, through tests in the laboratory and at a pilot site carried out by an accredited body: this is the QAL1 level. EN 14181 then governs the measurement quality of the UNIT installed at a given site, through the site-specific functional calibration (QAL2), continuous monitoring by the operator (QAL3) and the annual check (AST). An EN 15267-3 certified instrument must still go through these EN 14181 steps once installed.

How can I check whether an analyser model is EN 15267-3 certified?

By consulting the register of the certification body concerned (for example the QAL1 register maintained by TÜV, or the list of certified products of the British MCERTS scheme), which states the manufacturer, the exact model, the pollutants covered, the validated measuring range and the validity date of the certificate. A simple "EN 15267 compliant" statement on a commercial datasheet, with no reference to a certificate that can be consulted, is not enough to establish this.

Does CDL-Tecora offer EN 15267 certified instruments?

CDL-Tecora is a manufacturer of manual sampling and reference measurement instruments (isokinetic probes, persistent organic pollutant sampling systems, mercury samplers): these are not AMS installed for continuous operation and therefore not systems subject to EN 15267-3 certification, which applies exclusively to CEMS. These reference instruments do, however, serve as the comparison method during the QAL2 calibrations and AST checks provided for by EN 14181 for CEMS that are already installed and certified.

Does a site have to have its CEMS recertified if EN 15267-3 changes?

Certification follows the life cycle of the model and of the version of the standard under which it was tested; a revision of the standard that tightens the performance criteria (permissible uncertainty, for example) may lead the certification body to require new tests to maintain recognition of the model, according to the transition rules it publishes. Monitoring this validity is the responsibility of the manufacturer and the certification body, not of the site operator.

Preparing a measurement campaign? Our experts can help.

Personalised advice, a fast quote and technical support to choose the right instrument for this standard.