Laboratory
Fittings

Under-Bench Safety Cabinet 3030 Series
Under-bench safety cabinet for flammable products
This under-bench safety cabinet from the 3030 series is designed for storing flammable and multi-hazard products in a compact space, under a worktop. It is available in several sizes, detailed in its datasheet.
View product
3030M Series Safety Cabinet
30-Minute Fire-Resistant Safety Cabinet, 3030M Series
The 3030M series safety cabinet is a 30-minute fire-resistant cabinet compliant with the EN 14470-1 and FM 6050 standards, intended for storing flammable products. Its compartmented configurations make it possible to separate incompatible products.
View product
3030PV Series Safety Cabinet
3030PV series safety cabinet for flammable products
The 3030PV series safety cabinet is designed for storing flammable and multi-hazard products. It is available in several sizes, detailed in its datasheet.
View product
3030T Series Safety Cabinet
3030T series safety cabinet for flammable products
The 3030T series safety cabinet is designed for storing flammable and multi-hazard products. It is available in several sizes, detailed in its datasheet.
View product
7.60 Series Safety Cabinet
7.60 series safety cabinet for flammable products
The 7.60 series safety cabinet is designed for storing flammable and multi-hazard products. It is available in several sizes, detailed in its datasheet.
View product
7.90ARD Series Fire-Resistant Safety Cabinet
7.90ARD Series Fire-Resistant Safety Cabinet
The 7.90ARD series fire-resistant safety cabinet is designed for the safe storage of flammable products. It is available in several sizes, detailed in its datasheet.
View product
7.90M Series Safety Cabinet
7.90M series safety cabinet for flammable products
The 7.90M series safety cabinet is designed for storing flammable products. It is available in several sizes, detailed in its product sheet.
View product
7.90T Series Safety Cabinet
Safety cabinet with containment drawers, 7.90T series
The 7.90T series safety cabinet is a flammables cabinet with ergonomic containment drawers, making containers easier to handle while containing any leaks.
View product
Externally Ducted Hood
Laboratory hood with direct discharge to the outside
The externally ducted hood connects to an extraction duct that discharges the stale air directly out of the building, an alternative to filtration/recirculation hoods for laboratory workstations handling chemical vapours.
View product
Filtration Hood
Laboratory filtration hood, compliant with NFX15-211
This range of laboratory filtration hoods, compliant with the NFX15-211 standard, offers activated carbon filters for vapours and HEPA filters for particles, with several options depending on the model.
View product
Laboratory Fume Cupboard
Laboratory fume cupboard with containment failure alarm
This laboratory fume cupboard complies with the NF XP X 15-206 standard and includes air inlet velocity monitoring with a visual and audible alarm, to signal immediately any containment failure while chemicals are being handled.
View product
Safety Cabinet for Gas Cylinders
Flammable safety cabinet for gas cylinders
This flammable, multi-hazard safety cabinet is designed for storing gas cylinders. It is available in several sizes, detailed in its datasheet.
View product
H40 Air Recirculation Unit
Air recirculation unit for storage cabinet, reference H40
The H40 air recirculation unit uses an electric fan to extract the harmful and toxic vapours present in a storage cabinet, purifies them through an activated carbon filter, then releases them into the atmosphere without danger to the environment.
View product
H50 Air Recirculation Unit
Air recirculation unit for storage cabinet, reference H50
The H50 air recirculation unit uses an electric fan to extract the harmful and toxic vapours present in a storage cabinet, purifies them through an activated carbon filter, then releases them into the atmosphere without danger to the environment.
View product
Laboratory Cabinets
Range of laboratory cabinets for chemical storage
This range of laboratory cabinets addresses chemical storage challenges. The cabinets are made of moisture-resistant melamine panel on all faces, 19 mm thick. The whole range is presented in a dedicated catalogue.
View product
Laboratory Furniture
Laboratory furniture and range of decontaminable chairs
This range of laboratory furniture includes in particular chairs compliant with the EN 1728, EN 1021-1, EN 1021-2 and EN 61340-5-1 standards, in easily decontaminable polyurethane foam, with a swivel seat and adjustable height.
View product
Lithium-Ion Battery Safety Cabinet
Safety cabinet dedicated to storing lithium-ion batteries
This safety cabinet reduces the fire and explosion risks associated with storing lithium-ion batteries. It offers 105 minutes of fire resistance in line with the ISO 834 temperature rise curve, and can be fitted with high-capacity perforated shelves, spill containment trays and a dedicated internal extinguisher.
View product
Laboratory Bench
Modular laboratory bench, Premium range
This modular laboratory bench, compliant with the NFX1201 standard, combines a corrosion-resistant supporting structure, a worktop and, depending on the models, a splashback or splashback-shelf, which can be fitted out to receive taps and power sockets.
View product
Air Recirculation Fume Cupboard
Laboratory air recirculation fume cupboard
This air recirculation fume cupboard filters the air from the workstation and then recirculates it into the room, a solution suited to laboratories with no possibility of connecting to an external extraction duct.
View product
S11 Multi-Hazard Safety Cabinet
S11 multi-hazard safety cabinet for chemicals
The S11 is a multi-hazard safety cabinet designed for storing hazardous chemicals that require physical separation and enhanced resistance. It is available in several sizes, detailed in its datasheet.
View product
S14 Multi-Hazard Safety Cabinet
S14 multi-hazard safety cabinet for chemicals
The S14 is a multi-hazard safety cabinet designed for storing hazardous chemicals that require physical separation and enhanced resistance. It is available in several sizes, detailed in its datasheet.
View product
S6 Multi-Hazard Safety Cabinet
S6 multi-hazard safety cabinet for chemicals
The S6 is a multi-hazard safety cabinet designed for storing hazardous chemicals that require physical separation and enhanced resistance. It is available in several sizes, detailed in its datasheet.
View product
SA Corrosion-Resistant Safety Cabinet
Corrosion-resistant safety cabinet for acids and bases
The SA is a corrosion-resistant safety cabinet designed for storing acids and bases. It is available in several sizes, detailed in its datasheet.
View product
SB Corrosion-Resistant Safety Cabinet
Corrosion-resistant safety cabinet for acids and bases
The SB is a corrosion-resistant safety cabinet designed for storing acids and bases. It is available in several sizes, detailed in its datasheet.
View product
SH12 Filtration Hood
Laboratory filtration hood, reference SH12
The SH12 filtration hood is part of the CDL-Tecora range of laboratory hoods (referenced SH6, SH9, SH12, SH15) intended to protect the operator from vapours and particles emitted during chemical handling.
View product
SH15 Filtration Hood
Laboratory filtration hood, reference SH15
The SH15 filtration hood is part of the CDL-Tecora range of laboratory hoods (referenced SH6, SH9, SH12, SH15) intended to protect the operator from vapours and particles emitted during chemical handling.
View product
SH6 Filtration Hood
Laboratory filtration hood, reference SH6
The SH6 filtration hood is part of the CDL-Tecora range of laboratory hoods (referenced SH6, SH9, SH12, SH15) intended to protect the operator from vapours and particles emitted during chemical handling.
View product
SH9 Filtration Hood
Laboratory filtration hood, reference SH9
The SH9 filtration hood is part of the CDL-Tecora range of laboratory hoods (referenced SH6, SH9, SH12, SH15) intended to protect the operator from vapours and particles emitted during chemical handling.
View product
Ventilation and Filtration Unit
Ventilation and filtration unit for storage cabinet
This ventilation and filtration unit uses an electric fan to extract the harmful and toxic vapours present in a storage cabinet, purifies them through an activated carbon filter, then releases them into the atmosphere without danger to the environment.
View product
Washing Station Range
Washing station units for laboratories
CDL-Tecora offers a range of laboratory washing station units, available in several lengths from 600 to 1500 mm and with one or two basins. The full catalogue of laboratory furniture is downloadable.
View product
Laboratory Fume Cupboard
NF XP X 15-206 Compliant Laboratory Fume Cupboard
This laboratory fume cupboard complies with the NF XP X 15-206 standard in force and combines air inlet velocity monitoring, a visual and audible alarm, and a secure sash to protect the operator during handling.
View productConsumables

Teflon Consumables
Teflon (PTFE) Consumables for the Laboratory
CDL-Tecora offers a range of Teflon (PTFE) laboratory consumables, valued for their chemical and thermal resistance in the most demanding applications.
View product
Filters
Laboratory Filters for Sampling and Analysis
CDL-Tecora offers a wide range of laboratory filters for air sampling, gas filtration and sample preparation. All the references are brought together in a dedicated downloadable catalogue.
View product
Laboratory Glassware
Laboratory glassware
CDL-Tecora offers a range of laboratory glassware. All references are presented in a dedicated downloadable catalogue.
View product
Industrial Glassware and Tubing
Industrial glassware and tubing for laboratory and process use
CDL-Tecora offers a range of industrial glassware and tubing for laboratory and process applications. All references are presented in a dedicated downloadable catalogue.
View product
200 µl Extra-Long 91 mm Tips – Non-Sterile x 1000
200 µl extra-long micropipette tips, non-sterile
These extra-long (91 mm) micropipette tips with a capacity of 200 µl are designed for pipetting into deep containers. Non-sterile, they are sold in packs of 1000 units in natural-colour plastic.
View product
Plastics
Plastic Consumables for the Laboratory
CDL-Tecora offers a range of plastic consumables for the laboratory. All references are presented in a dedicated downloadable catalogue.
View product
QuEChERS Extraction Salt Pouches
QuEChERS extraction salts for the analysis of pesticides and contaminants
CDL-Tecora's QuEChERS extraction salt pouches allow clean, efficient extraction of target compounds from complex samples. They are widely used for the analysis of pesticide residues, contaminants and in toxicology.
View product
Tubing and Stoppers
Laboratory Tubing and Stoppers
CDL-Tecora offers a range of laboratory tubing and stoppers. All references are presented in a dedicated downloadable catalogue.
View product
Laboratory Volumetric Glassware
Volumetric glassware for precise laboratory measurement
CDL-Tecora offers a range of laboratory volumetric glassware (volumetric flasks, pipettes, burettes, measuring cylinders) for the precise volume measurements required by analytical protocols. The full catalogue is available to download.
View productInstrumentation

Model 2500 Water Bath Dissolution System
Configurable water bath dissolution system USP 1, 2, 5, 6
The Model 2500 is a Distek water bath dissolution system configurable as USP Apparatus 1, 2, 5 and 6 as well as intrinsic dissolution, with a touchscreen for extensive management of users, methods and reports, designed for both quality control and R&D.
View product
Model 2500 RTD Water Bath Dissolution System
Water bath dissolution system with wireless temperature sensors
The Model 2500 RTD is a Distek water bath dissolution system configurable as USP Apparatus 1, 2, 5, 6 and intrinsic dissolution, fitted with patented wireless temperature sensors continuously monitoring each vessel, and a touchscreen for managing methods, users and reports.
View product
Model 2500 Select Bathless Dissolution System
Rapid-heating bathless dissolution system
The Model 2500 Select is a Distek bathless dissolution system, configurable as USP Apparatus 1, 2, 5, 6 and intrinsic dissolution, offering extremely short heating times, reduced energy consumption and patented wireless temperature sensors on each vessel.
View product
Centrifugation
Centrifuges and Consumables for Laboratory Centrifugation
CDL-Tecora offers a range of centrifuges and centrifugation consumables for the laboratory. All references are presented in a dedicated downloadable catalogue.
View product
Cipher: Dissolution Control Software for 21 CFR Part 11 Compliance
Control and data integrity software for your dissolution tests
Cipher is Distek's software for controlling and tracing dissolution tests: installed as a standalone workstation or on a network, it controls Distek dissolution testers, automatic samplers and disintegration testers while ensuring compliance with 21 CFR Part 11 on data integrity.
View product
Automatic Dissolution Sampler: Eclipse 5300
Automatic dissolution sampler with precision syringe pumps
The Eclipse 5300 provides fast, precise sampling for dissolution tests thanks to precision syringe pumps and a minimum internal volume of 4.5 ml, with no valves or rotary pumps, for reduced sample carryover and increased reliability.
View product
ezfill+: Heating, Degassing and Dispensing of Dissolution Media
Automated heating, degassing and dispensing of dissolution media
The ezfill+ automates the heating, degassing and dispensing of dissolution media, controlled by method, in order to reduce out-of-specification failures linked to media preparation and to secure the traceability of each parameter.
View product
Filtration/Separation
Filtration and separation consumables for the laboratory
CDL-Tecora offers a range of filtration and separation consumables for the laboratory, including filters suited to different analytical applications.
View product
Heating/Cooling Equipment
Heating and Cooling Equipment for the Laboratory
CDL-Tecora offers a range of laboratory heating and cooling equipment, including ovens, drying ovens and ultrasonic baths, for sample preparation and treatment.
View product
Ovens and Incubators
Temperature-Controlled Laboratory Ovens and Incubators
CDL-Tecora offers a range of Izitec brand laboratory ovens and incubators, intended for drying, sterilising and incubating samples at a controlled temperature.
View product
Pumps and Rotary Evaporators
Laboratory Vacuum Pumps and Rotary Evaporators
CDL-Tecora offers a range of KNF brand vacuum pumps and rotary evaporators, intended for solvent evaporation and vacuum generation in the laboratory.
View product
Laboratory Washers
Automatic washers for laboratory glassware
CDL-Tecora offers a range of laboratory washers for automated glassware cleaning, for a reproducible result before analysis.
View product
Measurement and Weighing
Measuring and Weighing Instruments for the Laboratory
CDL-Tecora offers a range of measuring and weighing instruments for the laboratory. For a specific need not listed, our team studies tailor-made solutions.
View product
Made in FranceOmniFlow Calibration Bench
Calibration bench for air sampling pumps and CIP10 heads
The OmniFlow Bench is a new-generation calibration bench designed to calibrate personal sampling pumps and CIP10 heads, with remarkable accuracy (< 1%) and full metrological traceability. Its integrated mass flow meter, powered by compressed air, eliminates the pressure drops of conventional flow meters.
View product
Opt-Diss 410: In-Situ Fibre Optic UV System for Dissolution Tests
In-situ fibre optic UV system for dissolution tests
The Opt-Diss 410 measures dissolution directly in the vessel using an in-situ fibre optic UV system, eliminating sampling, filters, tubing and syringes, for near real-time data collection with up to one measurement point every 5 seconds.
View product
Optics
Optical Instruments for the Laboratory
CDL-Tecora offers a range of laboratory optical instruments, details of which are available in the downloadable technical catalogue.
View product
Pipetting
Pipettes and Liquid Dispensing Systems for the Laboratory
CDL-Tecora offers a range of pipettes and liquid dispensing systems for the laboratory. All references are presented in a dedicated downloadable catalogue.
View product
SensIR 3200: Bathless Tablet Disintegration Tester
Tablet disintegration tester without a water bath
The SensIR 3200 combines bathless heating and near-infrared detection to test tablet disintegration without the constraints of a conventional water bath, with a choice of two, four or six positions in a minimal footprint.
View product
Small Volume Kit for Distek Dissolution Systems
Small volume conversion kit for dissolution tests
The Distek small volume kit improves the accuracy and sensitivity of dissolution tests for high-potency, low-concentration drugs, medical devices, microparticles, beads and topical formulations (creams, gels, ointments), beyond the capabilities of standard Apparatus 1 or 2 baths.
View product
Stirring
Laboratory Stirrers and Stirring Systems
CDL-Tecora offers a range of laboratory stirrers for homogenising and mixing samples. All references are presented in a dedicated downloadable catalogue.
View productChemicals

Aguettant Water
Aguettant laboratory water in bottles
CDL-Tecora distributes Aguettant brand laboratory water, available in 500 ml and 1000 ml bottles, for laboratory dilution and preparation needs.
View product
Chromatography and Spectroscopy
Consumables and accessories for liquid chromatography (HPLC) and spectroscopy
CDL-Tecora offers a range of consumables and accessories for liquid chromatography (HPLC) and spectroscopy, including equipment dedicated to LC-MS coupling. Two detailed catalogues are available for download.
View product
Microbiology Products
Consumables for laboratory microbiology
CDL-Tecora offers a range of products for laboratory microbiology. All references are brought together in a dedicated downloadable catalogue.
View product
Products for the Pharmaceutical Industry
Excipients and consumables for the pharmaceutical industry
CDL-Tecora offers a range of products for the pharmaceutical industry, including excipients for formulation and quality control. All the references are detailed in a dedicated downloadable catalogue.
View product
Detergents
Laboratory detergents for cleaning glassware
CDL-Tecora offers a range of laboratory detergents dedicated to cleaning glassware and equipment, to remove organic and mineral residues before analysis.
View product
REAGECON Standards
REAGECON Certified Standards and Reference Solutions
CDL-Tecora distributes the REAGECON range of certified standards and reference solutions, used for the calibration and quality control of laboratory analysis instruments.
View product
Reagents and Solvents
Analytical Reagents and Solvents for the Laboratory
CDL-Tecora offers a range of analytical reagents and solvents for laboratories. All references are detailed in a dedicated downloadable catalogue.
View product
VOC Standards
Certified standards for VOC analysis
CDL-Tecora offers a range of reference standards for the analysis of volatile organic compounds (VOCs), as mixes or as single-compound products, intended for the calibration of laboratory analysis instruments.
View product