Standalone Gas Detector – S500L-IR / S500LT-IR
Infrared combustible gas detector, standalone and insensitive to catalytic poisons
How can explosive concentrations of combustible gases be detected without fearing false negatives caused by catalytic poisons? The S500L-IR and S500LT-IR detectors use non-dispersive infrared (NDIR) technology that is insensitive to this phenomenon.
The S500L-IR and S500LT-IR are standalone NDIR (non-dispersive infrared) gas detectors, designed to give fast, reliable warnings in the event of explosive concentrations of combustible gases. Unlike conventional pellistor sensors, they are not affected by catalytic poisons.
Combustible gas detection
NDIR (non-dispersive infrared) technology
Insensitive to catalytic poisons
Reliability maintained where a pellistor would be desensitised
Single-operator calibration
Without downgrading the hazardous area certification
EEPROM memory
Settings retained even in the event of a power cut
A traditional pellistor sensor can be desensitised by catalytic poisons, with the risk of no longer detecting an explosive concentration at the critical moment. The S500L-IR and S500LT-IR models address this risk with high-quality, standalone NDIR (non-dispersive infrared) gas sensors, which offer a host of sophisticated features to provide fast, reliable warnings of explosive concentrations of combustible gases.
NDIR technology insensitive to catalytic poisons
Unlike pellistor sensors, the infrared sensor is not affected by catalytic poisons.
Standalone or connected operation
Can be used on its own or connected to a controller/computer.
Calibration without downgrading the zone
Configuration and calibration possible by a single person, without downgrading the hazardous area certification.
Multifunction digital display
4-character alphanumeric display showing gas concentration and instrument status.
Fully automated calibration
No physical adjustment required: the on-board computer manages the calibration procedure.
Non-volatile memory
User settings are retained indefinitely in EEPROM, even in the event of a power cut.
| Sensor technology | NDIR (non-dispersive infrared) |
|---|---|
| Operating mode | Standalone or connected to a controller/computer |
| Display | Alphanumeric digital, 4 characters, shows concentration and status |
| Calibration | Automatic via on-board computer, no physical adjustment |
| Memory | Non-volatile EEPROM, indefinite retention |
No accessory listed yet.
FAQ
Got a project? Our experts are ready to help.
Personalised advice, a fast quote and technical support to choose the solution that fits your needs.

