Our products · Gas purity control
Gas purity control

LPDT Transmitter Hygrometer

Compact dew point transmitter, powered by a 2-wire current loop

Need to monitor dew point continuously with minimal wiring, including outdoors? The LPDT is the smallest dew point transmitter powered by a 2-wire current loop, with built-in display.

The LPDT is the smallest dew point transmitter powered by a current loop (2-wire) fitted with a display. Operated via a miniature LCD screen and 3 push buttons, it delivers a linear, configurable analogue output, with a weather-resistant cap for NEMA 4X (IP65) outdoor use.

The smallest 2-wire transmitter

Current loop powered, with built-in display

Aluminium oxide HTF sensor

Sensitive, fast, low drift

IP65 / NEMA 4X protection

Weather-resistant cap for outdoor use

Configurable analogue output

Linear, adjustable according to the display unit

Protection rating (outdoor option)

NEMA 4X (IP65)

Power supply

2-wire current loop

Sensor type

Aluminium oxide HTF

Installing a dew point transmitter on an existing line without running new power cables is often a field constraint. The LPDT addresses this: it is the smallest dew point transmitter powered by a current loop (2-wire) fitted with a display. This fully functional instrument is operated via a miniature LCD screen and 3 push buttons, with a simple user interface. Its analogue output is linear according to the unit selected for the display and remains user-configurable; a weather-resistant cap is available for NEMA 4X (IP65) outdoor applications.

  • The smallest 2-wire transmitter with display

    Current loop power, no additional wiring.

  • Simple LCD interface

    Miniature LCD screen and 3 push buttons for intuitive operation.

  • Configurable analogue output

    Linear according to the display unit selected, user-adjustable.

  • IP65 outdoor version

    Weather-resistant cap available for NEMA 4X (IP65) use.

  • Fast-response HTF sensor

    Ultra-thin, highly hygroscopic aluminium oxide layer for high sensitivity.

Category
Gas purity control
Reference
LPDT

FAQ

How can dew point be monitored continuously without running additional power cabling?+

The LPDT is a transmitter powered by a 2-wire current loop: a single cable is enough for both power and signal transmission.

Can the LPDT be installed outdoors?+

Yes, a weather-resistant cap is available for NEMA 4X (IP65) outdoor applications.

How is the LPDT's analogue output adjusted?+

The output is linear with respect to the selected display unit and remains user-configurable via the LCD screen and the 3 push buttons.

How does the LPDT's humidity sensor work?+

A hygroscopic aluminium oxide layer adsorbs or releases water molecules depending on the ambient water vapour pressure; this change results in a variation in electrical capacitance measured by the sensor.

Got a project? Our experts are ready to help.

Personalised advice, a fast quote and technical support to choose the solution that fits your needs.