XPDM Portable Hygrometer
Portable hygrometer for spot checks of dew point in dry gases
Need to quickly check the humidity level of a gas on site? The XPDM measures dew point from -100 °C to +20 °C in a few minutes, with no fixed installation.
The XPDM is a compact, portable hygrometer designed to carry out precise spot checks of dew point humidity, from -100 °C to +20 °C, directly on site. Its ultra-thin aluminium oxide HTF sensor offers a fast response time and stays protected from ambient air between measurements.
Dew point measurement
De -100 °C à +20 °C
Fast response time
Thanks to the ultra-thin HTF sensor
Protected sensor
Dry housing between measurements, with no contamination
Battery operation
Portable instrument, no mains power
Checking the humidity of a gas directly at an installation, without waiting for a laboratory analysis, is essential for quickly diagnosing a drying drift or validating the quality of a process gas. The XPDM meets this need: this compact, portable hygrometer makes it possible to carry out precise dew point humidity checks over a range of -100 °C to +20 °C, during interventions as well as preventive maintenance.
Ultra-thin HTF sensor
Ultra-thin aluminium oxide layer developed after several years of research, for increased hygroscopic sensitivity and a fast response time.
Anti-contamination protection
Outside measurements, the sensor stays in a dry housing sheltered from the ambient atmosphere, which avoids any contamination between two checks.
Wide measuring range
From -100 °C to +20 °C dew point, to cover very dry gases as well as measurements close to ambient.
Portable and self-contained
Compact battery-powered instrument, designed for spot checks directly on site.
Simple to use
Simply connect the gas to be analysed and establish a flow of 1 to 2 L/min to start the measurement.
| Sensor type | Aluminium oxide HTF (ultra-thin film) |
|---|---|
| Measuring range | -100 °C to +20 °C (dew point) |
| Recommended gas flow | 1 to 2 L/min |
| Power supply | Battery-powered, portable instrument |
| Measurement principle | Sensor exposed to the gas only during measurement, dry housing between two checks |
No accessory listed yet.
FAQ
Got a project? Our experts are ready to help.
Personalised advice, a fast quote and technical support to choose the solution that fits your needs.

