Isokinetic Probe Catalogue: Heated, Non-Heated Probes and Associated AccessoriesProduct news

Isokinetic Probe Catalogue: Heated, Non-Heated Probes and Associated Accessories

Heated probes for dust and dioxin sampling, non-heated probes with stainless steel or titanium filter holders: the catalogue brings together the available configurations and their reference standards.

Updated on
Share

Heated Probes (Outstack): Dust, Acids, Heavy Metals, Dioxins

Heated probes, positioned outside the duct (outstack), cover dust measurement in accordance with the EN 13284-1, US EPA Method 5 and ISO 9096 standards. They are combined with cold-bath kits for measuring acids and heavy metals, and with dioxin kits for analysing PCDD/F, PCBs and PAHs according to EN 1948-1 and US EPA Method 23 — a modular configuration that covers most regulatory measurement campaigns on channelled emissions.

Non-Heated Probes (Instack) and Measurement Accessories

Non-heated probes, positioned inside the duct (instack), meet the same dust measurement requirements (EN 13284-1, US EPA Method 17, ISO 9096) in a more compact configuration. The associated accessories include Pitot tubes for measuring flue gas temperature and velocity, as well as filter holders compatible with flat filters or thimble filters, available in stainless steel or titanium depending on the level of corrosion resistance required by the effluent.

Go further

Standards mentioned

Frequently asked

FAQ

Questions about this topic? Here are the most common answers.

Another question?
Should I choose a heated or non-heated probe?

It depends on the parameter measured and the duct conditions. Both configurations cover dust measurement under the same families of standards (EN 13284-1, ISO 9096), but a heated probe is needed whenever a risk of condensation or a measurement of gaseous compounds (dioxins, acids) requires it.

When should a titanium filter holder be preferred to stainless steel?

Titanium offers better corrosion resistance in effluents laden with acid or halogenated compounds. Stainless steel remains suitable for most standard applications, at a lower acquisition cost.

A project to scope? Our experts can help.

Personalised advice and a fast quote for your measurement project.