Our products · Emissions monitoring
Emissions monitoring

Non-Heated Isokinetic Sampling Probes – Instack

Non-heated isokinetic sampling probe for dust measurement

Measure low dust concentrations in the stack in accordance with the EN 13284-1, ISO 9096 and US EPA Method 17 standards.

CDL-Tecora's Instack probe is a non-heated isokinetic sampling probe dedicated to dust measurement campaigns on stationary sources. Compliant with the EN 13284-1, ISO 9096 and US EPA Method 17 standards, it makes it possible to collect representative samples for monitoring industrial atmospheric discharges.

Triple standards compliance

EN 13284-1, ISO 9096, US EPA Method 17

Stainless steel/titanium construction

Industrial robustness

Interchangeable media

Flat filters or thimbles

Multiple configurations

Elbow or integrated

The Instack non-heated isokinetic sampling probe meets the requirements of dust measurement campaigns carried out on stationary sources. Developed for environmental and regulatory applications, it makes it possible to collect representative samples in accordance with the reference methods used for monitoring industrial atmospheric discharges.

  • Compliance with reference methods

    EN 13284-1, ISO 9096 and US EPA Method 17 for the determination of low dust concentrations.

  • Rugged construction

    Available in stainless steel or titanium to withstand industrial environments.

  • Interchangeable collection media

    Flat filters or thimbles, in several materials compatible with industrial effluents.

  • Adaptable configuration

    Elbow or integrated version, with vertical filter holder, to suit different duct geometries.

  • Version with vertical filter holder

    Filtration parallel to the flow: less rinse volume and better recovery of particles at very low concentration.

  • Integrated version with S-type Pitot tube

    Particle sampling and velocity measurement with a single piece of equipment.

Category
Emissions monitoring
Reference
Instack
Country of manufacture
Made in France

Applications

Determination of low dust concentrations

Determination of low dust concentrations

Characterisation of particles in the stack

Characterisation of particles in the stack

Environmental compliance campaigns

Environmental compliance campaigns

Regulatory checks of industrial installations

Regulatory checks of industrial installations

FAQ

How can low dust concentrations be measured at the stack outlet?+

The Instack probe, compliant with the EN 13284-1, ISO 9096 and US EPA Method 17 standards, makes it possible to collect representative samples to determine low dust concentrations.

Which materials should be chosen for an isokinetic probe in a corrosive environment?+

The Instack probe is available in stainless steel or titanium, depending on the nature of the effluents and the level of chemical resistance required.

Which collection media are compatible with the Instack probe?+

It accepts flat filters or thimbles, in several filtration materials compatible with industrial effluents.

Does the Instack probe adapt to all duct geometries?+

Yes, available in an elbow configuration or integrated with a vertical filter holder, it adapts to the different duct geometries encountered on site.

In which sectors should a non-heated isokinetic probe be used?+

Cement works, incineration units, power plants, chemical industries and all installations subject to monitoring of atmospheric discharges.

Stainless steel or titanium?+

Stainless steel suits most applications; titanium provides increased resistance in highly corrosive environments.

Got a project? Our experts are ready to help.

Personalised advice, a fast quote and technical support to choose the solution that fits your needs.