Our products · Emissions monitoring
Emissions monitoring

EN 13284-1 Isokinetic Sampling Probe

Isokinetic sampling probe for measuring dust in ducts

Carry out reliable dust measurement campaigns, compliant with EN 13284-1, ISO 9096 and US EPA Method 17.

The CDL-Tecora EN 13284-1 isokinetic sampling probe is designed for measuring dust and particle concentrations in industrial ducts, in accordance with the main international reference methods (EN 13284-1, ISO 9096, US EPA Method 17).

EN/ISO/EPA compliance

EN 13284-1, ISO 9096, US EPA Method 17

Rugged construction

AISI 316 or titanium

Modular assembly

1 m extensions

Isokinetic nozzle kit

Pitot tube compatible

Extension length

1 metre

The CDL Tecora isokinetic sampling probe is designed for measuring dust and particle concentrations in industrial ducts in accordance with the main international reference methods. Compatible with the requirements of the EN 13284-1 standard, ISO 9096 and US EPA Method 17, it makes it possible to carry out reliable measurement campaigns as part of atmospheric emissions monitoring.

  • Triple standards compliance

    EN 13284-1, ISO 9096 and US EPA Method 17.

  • Stainless steel or titanium construction

    AISI 316 stainless steel or titanium to withstand industrial effluents.

  • Modular assembly

    1-metre extensions to suit different duct geometries.

  • Vertical or horizontal filter holder

    Installs according to the stack configuration.

  • Isokinetic nozzle kit

    Compatible with Pitot tubes for representative sampling.

  • Compatible with in-situ equipment

    47 mm filter holders, impactors, Pitot tubes, isokinetic nozzles.

Category
Emissions monitoring
Reference
EN 13284-1 Probe
Country of manufacture
Made in France

Applications

Industrial atmospheric emissions monitoring

Industrial atmospheric emissions monitoring

FAQ

Which probe should be used to measure dust in an industrial duct according to EN 13284-1?+

The CDL-Tecora isokinetic sampling probe complies with the EN 13284-1 standard, as well as ISO 9096 and US EPA Method 17, for reliable measurement campaigns.

Which materials are available for this isokinetic probe?+

It is offered in AISI 316 stainless steel or titanium, depending on the nature of the effluents to be sampled.

Does the probe adapt to different stack configurations?+

Yes, thanks to its modular assembly with 1-metre extensions and its vertical or horizontal filter holder, it adapts to different duct geometries.

Which accessories are compatible with this probe?+

It is compatible with 47 mm filter holders, impactors, Pitot tubes and an isokinetic nozzle kit.

What does the EN 13284-1 standard say?+

The EN 13284-1 standard is the European reference for determining low concentrations of dust in channelled emissions, by isokinetic sampling and weighing.

Got a project? Our experts are ready to help.

Personalised advice, a fast quote and technical support to choose the solution that fits your needs.