SH9 Filtration Hood
Laboratory filtration hood, reference SH9
Filter the chemical vapours emitted at your workstation without connection to an external duct.
The SH9 filtration hood is part of the CDL-Tecora range of laboratory hoods (referenced SH6, SH9, SH12, SH15) intended to protect the operator from vapours and particles emitted during chemical handling.
Operator protection
Filtration of the vapours and particles emitted at the workstation
Multi-reference range
Available in sizes SH6, SH9, SH12, SH15
Datasheet available
Technical documentation downloadable in PDF format
How can a chemical handling workstation be protected when no connection to an external extraction duct is available? A filtration hood such as the SH9 draws in air from the workstation and passes it through a filter before returning it, thus preventing any direct release of untreated vapours into the laboratory.
Workstation air filtration
The air drawn in at the handling station is filtered before being returned.
No external connection needed
Works without an extraction duct to the outside of the building.
Reference in a multi-size range
The SH9 is one of the four references in the range (SH6, SH9, SH12, SH15).
NF X 15-211 approved (May 2009)
By independent French laboratories and inspection bodies.
Molecular or HEPA filter
Vapours and powders contained within the enclosure and then removed as they pass through the filter.
| Category | Laboratory filtration hood |
|---|---|
| Reference | SH9 |
| Standard | NF X 15-211 (May 2009) |
| Filtration | Molecular or HEPA filter |
| External dimensions (L x D x H) | 900 x 750 x 1160 mm |
| Internal dimensions (L x D x H) | 845 x 700 x 935 mm |
No accessory listed yet.
Applications
Chemistry and analysis laboratories
Workstations handling volatile chemicals
FAQ
Got a project? Our experts are ready to help.
Personalised advice, a fast quote and technical support to choose the solution that fits your needs.



