Our products · Laboratory
Laboratory

SH6 Filtration Hood

Laboratory filtration hood, reference SH6

Filter the chemical vapours emitted at your workstation without connection to an external duct.

The SH6 filtration hood is part of the CDL-Tecora range of laboratory hoods (referenced SH6, SH9, SH12, SH15) intended to protect the operator from vapours and particles emitted during chemical handling.

Operator protection

Filtration of the vapours and particles emitted at the workstation

Multi-reference range

Available in sizes SH6, SH9, SH12, SH15

Datasheet available

Technical documentation downloadable in PDF format

How can a chemical handling workstation be protected when no connection to an external extraction duct is available? A filtration hood such as the SH6 draws in air from the workstation and passes it through a filter before returning it, thus preventing any direct release of untreated vapours into the laboratory.

  • Workstation air filtration

    The air drawn in at the handling station is filtered before being returned.

  • No external connection needed

    Works without an extraction duct to the outside of the building.

  • Reference in a multi-size range

    The SH6 is one of the four references in the range (SH6, SH9, SH12, SH15).

  • NF X 15-211 approved (May 2009)

    By independent French laboratories and inspection bodies.

  • Molecular or HEPA filter

    Vapours and powders contained within the enclosure and then removed as they pass through the filter.

Category
Laboratory
Reference
SH6

Applications

Chemistry and analysis laboratories

Chemistry and analysis laboratories

Workstations handling volatile chemicals

Workstations handling volatile chemicals

FAQ

What is the benefit of a filtration hood such as the SH6?+

It makes it possible to filter workstation air before returning it, without requiring connection to an external extraction duct.

What is the difference between the SH6 and the other references in the range (SH9, SH12, SH15)?+

They are four different sizes of the same filtration hood range; the datasheet for each reference specifies its dimensions and capacities.

Is this hood suitable without an external connection?+

Yes, it is a filtration hood: it does not require an extraction duct to the outside of the building.

Where can I find the full technical characteristics of the SH6?+

The datasheet is available for download in PDF format.

Got a project? Our experts are ready to help.

Personalised advice, a fast quote and technical support to choose the solution that fits your needs.