Our products · Laboratory
Laboratory

Externally Ducted Hood

Laboratory hood with direct discharge to the outside

Discharge chemical vapours from the workstation directly to the outside, without relying on a filter.

The externally ducted hood connects to an extraction duct that discharges the stale air directly out of the building, an alternative to filtration/recirculation hoods for laboratory workstations handling chemical vapours.

Direct vapour discharge

Release to the outside of the building via a connection to an extraction duct

Operator protection

Containment of chemical vapours and gases during handling

Connection to an extraction network

Connects to an existing extraction duct or one to be installed

Datasheet available

Technical documentation downloadable in PDF format

How can a workstation exposed to chemical vapours be protected when an extraction network to the outside is available? The externally ducted hood connects to a duct that discharges the stale air directly out of the building. Unlike a filtration/recirculation hood, it does not depend on the saturation of an internal filter: the air is not recirculated in the room but released outside.

  • Direct discharge to the outside

    Stale air is discharged out of the building via a connecting duct, with no recirculation in the room.

  • No filter to monitor

    The absence of an internal filter removes the need to manage a saturation indicator or replace activated carbon cartridges.

  • Workstation protection

    Isolates the operator from chemical vapours and gases emitted during handling.

  • Delivered ready to use

    No assembly: to be connected to the electrical supply and the vapour extraction system.

  • Transparent walls

    Optimal lighting of the worktop and immediate visibility of the products being handled.

  • 4 sizes

    External widths of 600, 900, 1200 and 1500 mm.

Category
Laboratory
Reference
Externally Ducted Hood

Applications

Chemistry and analysis laboratories

Chemistry and analysis laboratories

Workstations handling volatile chemicals

Workstations handling volatile chemicals

FAQ

What is the difference between an externally ducted hood and a filtration hood?+

An externally ducted hood discharges the stale air directly to the outside of the building via an extraction duct, whereas a filtration hood recirculates the laboratory air after it has passed through a filter.

Is an extraction network needed to install this hood?+

Yes, it requires a connection to a duct discharging the air to the outside of the building.

Does this hood require filter maintenance?+

No, as the air is not recirculated but discharged outside, there is no internal filter to monitor or replace.

Where can I find the full technical characteristics of this hood?+

The datasheet is available for download in PDF format.

Got a project? Our experts are ready to help.

Personalised advice, a fast quote and technical support to choose the solution that fits your needs.