CDL-Tecora at the EnviroPro Angers Show: Asbestos Hygiene and Emissions on One StandCompany news

CDL-Tecora at the EnviroPro Angers Show: Asbestos Hygiene and Emissions on One Stand

At the EnviroPro Angers show, stand B8, CDL-Tecora presented its two flagship ranges: hygiene/asbestos (CAThiA, CIP10, GABIE) and emissions (DECS, EmiTest range) — two measurement worlds brought together for inspection bodies and operators present on both fronts.

Updated on
Share

Two Ranges Brought Together on One Stand

On stand B8 at the EnviroPro Angers show, CDL-Tecora presented side by side its Hygiene/Asbestos range — CAThiA sampling heads, CIP10 personal dust sampler, GABIE VOC sampling badge — and its Emissions range, with the DECS dioxin sampler and the full EmiTest range for isokinetic sampling. This joint presentation reflects a frequent reality among the inspection bodies and laboratories that visit: the same organisation often monitors both indoor air quality/occupational exposure and the regulated emissions of an industrial site.

Why This Pairing Matters to Show Visitors

For an inspection body or operator that manages both aspects — occupational hygiene and emissions compliance — being able to discuss the whole need with a single technical contact, rather than with two separate suppliers, simplifies the qualification of instruments and the consistency of after-sales service over time. It is this logic that guided the joint presentation of the two ranges on stand B8 at this show.

What we offer

Related instruments

CAThiA thoracic alveolar sampling head installed on a tripod in a contained asbestos-removal zoneMade in France
Environment, Hygiene and Health

CAThiA Dust and Fibre Sampling Head

Accuracy · Selectivity · Field

Static sampling head for dust and fibres in ambient air, with homogeneous deposition on the filter — no direct handling during installation or recovery.

View product
CIP10 personal dust samplerMade in France
Environment, Hygiene and Health

CIP10 Personal Dust Sampler

Personal sampler for measuring workers' exposure to dust

The CIP10 is a personal dust sampler intended to measure workers' exposure to dust and aerosols in industrial environments. Compact, autonomous and lightweight, it takes representative samples of the respirable, thoracic and inhalable fractions, which can be used in the laboratory for gravimetric analysis or for detecting contaminants such as respirable crystalline silica.

View product
GABIE sampling badge — GABIE sampling badge for organic pollutantsMade in France
Environment, Hygiene and Health

GABIE Sampling Badge for Organic Pollutants

GABIE passive badge for the simultaneous sampling of several volatile organic compounds

The GABIE badge (Gas Adsorbent Badges for Individual Exposure) allows the simultaneous sampling of a multitude of organic gases and vapours, by diffusion onto activated carbon, in order to determine a worker's Time-Weighted Average exposure (TWA). Its reliability has been tested according to a protocol compliant with the EN 838 standard.

View product
Continuous dioxin and furan sampler DECS (view 2)Made in France
Emissions monitoring

Continuous Dioxin and Furan Sampler – DECS

Continuous dioxin and furan sampler

The DECS is CDL-Tecora's solution for continuous sampling of emissions of dioxins, furans (PCDD/PCDF), PCBs and other persistent organic pollutants (POPs), compliant with EN 1948 and USEPA Method 23.

View product
Frequently asked

FAQ

Questions about this topic? Here are the most common answers.

Another question?
Which products were presented on stand B8?

On the Hygiene/Asbestos side: the CAThiA sampling head, the CIP10 personal dust sampler and the GABIE badge. On the Emissions side: the DECS dioxin sampler and the EmiTest range of isokinetic sampling.

Why present such different ranges (hygiene and emissions) together?

Because many inspection bodies and operators monitor both occupational exposure and the regulated emissions of their sites — bringing them together on one stand simplifies the technical discussion for visitors who need both measurement worlds.

A project to scope? Our experts can help.

Personalised advice and a fast quote for your measurement project.