Blog

News, regulations and field best practices for industrial emissions measurement and gas purity control.

LPDT Dew Point Transmitter: What It Is and How It WorksField best practices
18 November 2026

LPDT Dew Point Transmitter: What It Is and How It Works

The LPDT is a loop-powered (2-wire) dew point transmitter with a display. How its HTF aluminium oxide sensor works, its analogue output and outdoor use.

Read
Wobbe Index, Calorific Value and Natural Gas AnalyzersField best practices
16 November 2026

Wobbe Index, Calorific Value and Natural Gas Analyzers

Wobbe index, calorific value (GCV/NCV) and combustion air requirement index: what they are and how to measure them continuously on natural gas and recovery gases with a natural gas analyzer.

Read
Hydrogen Purity Analyzer: Thermal Conductivity (TCD) ExplainedField best practices
14 November 2026

Hydrogen Purity Analyzer: Thermal Conductivity (TCD) Explained

How can you measure hydrogen purity in a binary mixture (H2/N2, He/N2, SF6/air)? How thermal conductivity detection (TCD, or katharometer) works, and the CATARC MP hydrogen analyzer.

Read
Zirconia Oxygen Probe: Principle and Selection for Furnaces and Flue GasField best practices
12 November 2026

Zirconia Oxygen Probe: Principle and Selection for Furnaces and Flue Gas

Ceramic (zirconia) oxygen probe: measuring principle, 600 to 1700 °C range, in-situ flue gas measurement and process oxygen analyzer. How to choose between CarboProbe, OXITEC and ZOA.

Read
Laboratory Fit-Out: Benches, Fume Cupboards, Hoods and CabinetsField best practices
10 November 2026

Laboratory Fit-Out: Benches, Fume Cupboards, Hoods and Cabinets

Laboratory fit-out: how to choose benches (NFX1201), fume cupboards (NF XPX 15-206), filtration hoods (NFX15-211), storage cabinets and washing units.

Read
Fume Cupboard or Filtration Hood: How to ChooseField best practices
8 November 2026

Fume Cupboard or Filtration Hood: How to Choose

Fume cupboard, externally ducted hood or filtration hood: the first question is your extraction network. The solutions, their standards (NF XPX 15-206, NF X 15-211) and options.

Read
CDL-Tecora at the EnviroPro Angers Show: Asbestos Hygiene and Emissions on One StandCompany news
17 July 2026

CDL-Tecora at the EnviroPro Angers Show: Asbestos Hygiene and Emissions on One Stand

At the EnviroPro Angers show, stand B8, CDL-Tecora presented its two flagship ranges: hygiene/asbestos (CAThiA, CIP10, GABIE) and emissions (DECS, EmiTest range) — two measurement worlds brought together for inspection bodies and operators present on both fronts.

Read
PFAS in Industrial Emissions: What Changes with the New Regulatory DeadlineRegulations & standards
10 February 2026

PFAS in Industrial Emissions: What Changes with the New Regulatory Deadline

Per- and polyfluoroalkyl substances (PFAS) are gradually coming within the scope of parameters monitored at the stack outlet. An update on the sampling methods available and on what an operator must anticipate before the inspection.

Read
5 Habits to Avoid Cross-Contamination Between Two Measurement CampaignsField best practices
22 January 2026

5 Habits to Avoid Cross-Contamination Between Two Measurement Campaigns

A sampling train that is poorly decontaminated between two sites can invalidate an entire campaign on parameters measured at trace levels. Here are the field habits that limit this risk.

Read