Sulphur dioxide sampling impingers on an industrial platform — CDL-Tecora

Acid gases (HCl, HF, SO2)

EN 14791: Determination of the Mass Concentration of Sulphur Dioxide

Manual reference method for measuring sulphur dioxide (SO2) in channelled emissions

EN 14791 is the European reference method for the manual determination of the mass concentration of sulphur dioxide (SO2) in channelled emissions from stationary sources. The gaseous effluent is sampled through an absorbing solution based on hydrogen peroxide, which oxidises the SO2 to sulphate, then quantified by ion chromatography or titrimetry. It serves as the reference method for qualifying automatic SO2 analysers installed for continuous monitoring.

Key figures

  • EN 14791Standard
  • Ion chromatographyAnalysis
  • US EPA Method 8 (SO2 + H2SO4)US equivalent
Sulphur dioxide is emitted by the combustion of sulphur-containing fuels (coal, heavy fuel oil, certain alternative fuels) and by several chemical processes, with emission limit values regulated in particular for large combustion plants. As with EN 1911, SO2 being a gaseous species, EN 14791 sampling does not require isokinetic adjustment of the suction rate: all that matters is the complete trapping of the gas in the absorbing solution.

Absorption in hydrogen peroxide

SO2 is oxidised to sulphate directly in the absorbing solution

Analysis by ion chromatography or titrimetry

Determination of the sulphates formed during bubbling

Non-isokinetic sampling

Gaseous nature of SO2, unlike dust and metals

Reference for automatic SO2 analysers

Comparison method used to qualify a continuous monitor

On the ground

Points to watch

Size the sampling time to the regulatory period

The bubbling duration must cover the averaging period set by the applicable prefectoral order.

Check the hydrogen peroxide excess

An insufficient concentration of the absorbing solution can let some of the SO2 through without complete oxidation.

Do not confuse EN 14791 and US EPA Method 8

The American method also captures sulphuric acid mist in the same train, a wider scope than EN 14791.

Go further

Related standards

Frequently asked

FAQ

Questions about this standard? Here are the most common answers.

Another question?
What does the EN 14791 standard measure?

EN 14791 determines the mass concentration of sulphur dioxide (SO2) in channelled emissions from stationary sources, by bubbling sampling in a hydrogen peroxide solution and laboratory analysis.

Must sampling be isokinetic?

No. As with HCl (EN 1911), SO2 being a gaseous species, isokinetic adjustment of the suction rate is not required.

What is the difference between EN 14791 and EN 14212?

EN 14791 measures SO2 in channelled emissions using a wet reference method. EN 14212 measures SO2 in ambient air by UV fluorescence, an optical technology suited to the very low concentrations found in the atmosphere. The two standards do not apply to the same measurement medium.

Is US EPA Method 8 equivalent to EN 14791?

US EPA Method 8 covers a wider scope: it captures both SO2 and sulphuric acid mist (H2SO4/SO3) in a single isokinetic train, whereas EN 14791 is limited to SO2 by non-isokinetic bubbling.

Preparing a measurement campaign? Our experts can help.

Personalised advice, a fast quote and technical support to choose the right instrument for this standard.